The Fluoride Filter uses high-grade NSF Certified filtration for heavy metals, arsenic, lead, and all types of fluoride added to drinking water in the USA. If you are on city water, it is recommended to improve the quality of your hydrogen water. It is an additional pre-filter that is placed outside the Echo Water Machine and is installed directly into the inlet source water line. The Fluoride Filter can be installed with any of the Echo Water Machines.
Maximum Flow Rate: .75 gpm (2.84 L/min.)
Operating Temperature: 33°F – 100°F (0.6°C – 38°C)
Min Operating Pressure: 30 psi – (207 kPa)
Max Operating Pressure: 100 psi – (689 kPa)
Estimated Life: 6 months or 500 gallons (1893 liters) depending on water quality and flow rate
This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.
The Echo Replacement Filter is our most used filter as it works in nearly all our Echo Water Machines. The Echo Replacement filter removes:
The Echo Replacement Filter lasts up to 1000 gallons (4000 liters).
The Echo Replacement Filter is easily replaced by removing the door on the back of the machine then pushing down on the filter and pulling out. It is always recommended to clean your machine with an Echo Cleaning Cartridge whenever you replace your filter.
The Hard Water Filter is an optional pre-filter, designed to be placed outside any Echo Water Machine. The Hard Water Filter is installed directly on to the inlet source water line. This filter decreases the total dissolved solids (TDS) in your water, prolonging the life of your Echo Water Machine. It is recommended to replace the Hard Water Filter every 6 months for maximum efficacy.
Maximum Flow Rate: .75 gpm (2.84 L/min.)
Operating Temperature: 33°F – 100°F (0.6°C – 38°C)
Min Operating Pressure: 30 psi – (207 kPa)
Max Operating Pressure: 100 psi – (689 kPa)
Estimated Life: 6 months or 500 gallons (1893 liters) depending on water quality and flow rate
This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.
The Sulfur and Heavy Metals Filter is an optional pre-filter and is recommended for those whose water source is from well water. The Sulfur and Heavy Metals Filter is to be used outside of any Echo Water Machine. It is installed directly into the inlet source water line and can be installed with any of the Echo Water Machines. It is recommended to replace the Sulfur and Heavy Metals Filter every 6 months.
Maximum Flow Rate: .75 gpm (2.84 L/min.)
Operating Temperature: 33°F – 100°F (0.6°C – 38°C)
Min Operating Pressure: 30 psi – (207 kPa)
Max Operating Pressure: 100 psi – (689 kPa)
Estimated Life: 6 months or 500 gallons (1893 liters) depending on water quality and flow rate
User Manuals Frequently Asked QuestionsWhy Drink Our Hydrogen Water? Studies & Science
The Echo H2 Machine is the first Echo Water Machine to have the proprietary Echo hydrogen module.
The Echo H2 Server is the newest in under sink Echo Technology.
NuLife Sciences, Inc.
7407 Ziegler Rd
Chattanooga, TN 37421
(800) 398-9842